0 Items
Select Page

HG Proctective Tile Coating Satin 1L


HG Proctective Coating Satin 1L.

Tile finish protective coating that deepens colour and structure.

The wafer-thin yet extremely protective tile coating protects floor tiles against wear, scratches and other damage. HG protective coating satin finish also deepens the colour and structure of the floor tiles.

This protective tile coating for floor tiles, flagstone and slate also masks existing worn patches and even has a non-slip effect. 1 litre is sufficient for approximately 40 m2 per layer.

How do you use HG protective coating satin finish?

Follow the steps below for correct use of HG protective coating satin finish. 1 litre is sufficient for approximately 40 m2 per layer.

For regular cleaning with a floor cloth we recommend HG shine restoring tile cleaner.

The surface must be completely clean and free of grease and dust.

The glue/paste and grout of new floor must be completely cured and dry. This usually takes 4-6 weeks of drying.

Do not shake before use and preferably apply with a wax spreader (see bottle neck label on the front). It is also possible to use a lint-free, clean towel wrapped around a squeegee. On rough surfaces use a (long-pile) paint roller.

Pour the tile finish liquid onto the floor and apply evenly in straight lanes and in one direction. Do not use circular motions or pressure.
Once the product has dried (after about 40 minutes), a second layer can be applied in the opposite direction onto the first layer.

The image displayed is intended to represent the product on offer, however manufactures change product packaging over time and we will update the website to reflect that as soon as we are aware, in all cases the product contained within should be identical. YOUR CONSUMER RIGHTS ARE NOT AFFECTED

Only 2 left in stock


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.